
Polara: Model-X2 System
The Model-X2 push button station (PBS) is designed for use at a pedestrian crosswalk with in-pavement or overhead flashing yellow lights. Working in conjunction with a control unit, the Model-X provides an instructional sign, a push button with directional arrow for activating the flashing lights, a voice message, and a group of yellow LEDs which flash in sync with the street lighting. The Model-X2 uses the same rugged and reliable push button station and housing as Polara’s EZ COMM Navigator PBS.
The Model-X2 is a hi-reliability, state-of-the-art signal system which provides the following features:
- High-reliability, full-featured push button with raised directional arrow.
- Installs easily and operates using either a 120 VAC or DC powered Control Unit.
- Features a locating tone and voice-on-location message, with ambient sound compensation.
- In-unit LEDs are synchronized to crosswalk sign, in-pavement, or overhead lights.
XAV2E-LED Push Button Station:
- Full-featured station designed for use at pedestrian crosswalk with in-pavement or overhead flashing lights.
- Works in conjunction with multiple option control units.
- Provides instructional sign, push button with directional arrow for activating flashing lights, group of 3 LEDs which flash in sequence with crosswalk lighting, a locate tone (optional), and voice message.
- Same rugged, reliable push button and housing as Polara’s EZ COMM Navigator.
- Automatic volume adjustment to ambient sound level via noise monitoring microphone, 10watt RMS audio amplifier, and built-in speaker.
- The XAV2E-LED is supplied with an 8 position terminal block ready for connection to a Control Unit.
- Supplied with stainless steel mounting hardware and installation instructions.
Description
The XAV2E-LED push button station is designed for use at a pedestrian crosswalk with in-pavement or overhead flashing yellow lights. It works in conjunction with the XAVCU2 control unit. Within this system the XAV2E-LED provides an instructional sign, a push button with directional arrow for activating the flashing lights, a voice message and a group of three yellow LEDs above the push button which flash in sync with the street lighting.
The XAV2E-LED uses the same rugged and reliable push button and housing as Polara’s EZ Comm Navigator. In addition to the push button, the XAV2E-LED contains a speaker, a 10 watt RMS audio amplifier, a noise monitoring microphone for auto volume control and LEDs.
The XAV2E-LED contains an 8 position terminal block ready for connection to an XAVCU2. The installer must supply an 8 conductor cable (Belden #27601A recommended). The unit is supplied with mounting hardware and installation instructions.
NOTE: This unit is not compatible with older XAVCU controllers.